Description
The L9613 is a monolithic integrated circuit containing standard ISO 9141 compatible interface functions.

FEATUREs
■ Operating power supply voltage range 4.8V ≤ VS ≤ 36V (40V for transients)
■ Reverse supply (battery) protected down to VS ≥ -24V
■ Standby mode with very low current consumption ISSB ≤ 1mA @ VCC ≤ 0.5V
■ Min. possible Baud rate according to ISO9141 ≥ 130 kBaud
■ Low quiescent current in off condition ISOFF = 120µA
■ TTL compatible TX input
■ Bidirectional K-I/O pin with supply voltage dependent input threshold
■ Over temperature shut down function selective to K-I/O pin
■ Wide input and output voltage range: -24V ≤ VK ≤ VS
■ K output current limitation, typ. IK = 60mA
■ Defined OFF output status in under voltage condition and VS or GND interruption
■ Controlled output slope for low EMI
■ High input impedance for open VS or GND connection
■ Defined output ON status of LO or RX for open LI or K inputs
■ Defined K output OFF for TX input open
■ Integrated pull up resistors for TX, RX and LO
■ EMI robustness optimized