Overview
The LB11967V is a single-phase bipolar variable speed fan motor pre-driver that works with an external PWM signal.
A highly efficient, quiet and low power consumption motor driver circuit, with a large variable speed, can be implemented by adding a small number of external components.
This device is optimal for driving large scale fan motors (with large air volume and large current) such as those used in servers and consumer products.

Functions
• Pre-driver for single-phase full-wave drive
    PNP-EMOS is used as an external power Transistor, enabling high-efficiency low-consumption drive by means of the low-saturation output and single-phase full-wave drive. (PMOS-NMOS also applicable)
• External PWM input enabling variable speed control
    Separately-excited upper direct PWM (f = 25kHz) control method, enabling highly silent speed control
• Compatible with 12V, 24V, and 48V power supplies
• Current limiter circuit incorporated
    Chopper type current limit at start
• Reactive current cut circuit incorporated
    Reactive current before phase change is cut to enable silent and low-consumption drive.
• Minimum speed setting pin
    Minimum speed can be set with external resistor. The start assistance circuit enables start at extremely low speed.
• Constant-voltage output pin for Hall bias
• Lock protection and automatic reset functions incorporated
• (Rotation speed detection), RD (Lock detection) output

APPLICATIONs
• Computing & Peripherals
• Consumer
• Server