datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  SANYO -> Panasonic  >>> LC573904 PDF

LC573904 Hoja de datos - SANYO -> Panasonic

LC573904 image

Número de pieza
LC573904

Other PDF
  no available.

PDF
DOWNLOAD     

page
18 Pages

File Size
624.7 kB

Fabricante
SANYO
SANYO -> Panasonic SANYO

Overview
The LC573904 is a CMOS 4-bit microcontroller that operates on low voltage and very low power consumption. It also contains 4K-byte ROM, 128 × 4 bits RAM, LCD drivers and melody function.


FEATUREs
(1) ROM :4096 × 8 bits
(2) RAM :128 × 4 bits
(3) Cycle Time
(4) Input / Output Terminals
    - Input ports : 4 terminals (S-port : 4 terminals)
    - Input / Output ports : 8 terminals (P0 port : 4 terminals, P1 port : 4 terminals)
    [Notes] When using the P1 port for output, the “L” level hold Tr. of P1 should be OFF.
        If P1 port becomes “H” level with “L” level hold Tr. on, it causes the through current from VDD to GND and increases the current consumption.
    - Output ports : 2 terminals (Buzzer / melody output terminal : 1 terminal, General output port : 1 terminal)
    - LCD segment output ports : 32 terminals (Possible to use output port by mask option)
    - LCD common output ports : 4 terminals
(5) LCD driver
    - Built-in Step-up / Step-down circuit
(6) Melody/Buzzer
    - Melody function Octave : 3 octaves Time of musical note : specified by program
    - Buzzer output
(7) Base timer
    - 15-bit base timer for timekeeping
(8) HALT release
    - Five vectors
    1. 15-bit base timer (500ms overflow output)
    2. 15-bit base timer (output every 32ms)
    3. S-port
    4. P1-port
    5. 1/10 second pulse
(9) Stand-by mode
    - HALT mode
    The program operation will be stopped in this mode. This mode is released by system reset and 5 vectors for HALT release above-mentioned.
(10) System reset
    - RES terminal
    - Reset by setting S1 to S4 terminals to “H” level simultaneously.
(11) Oscillation
    - Two oscillation circuits
    - 32.768kHz crystal oscillation / RC oscillation
(12) Power supply
    - Ag-battery : VDD1-VSS=1.20V to 1.65V, Step-up voltage (VDD2-VSS=2.4V to 3.3V)
    - Li-battery : VDD2-VSS=2.50V to 3.60V, Step-down voltage (VDD1-VSS=1.25V to 1.8V)
    - External voltage supply : VDD2-VSS=2.00V to 6.00V, Step-down voltage (VDD1-VSS=1.3V to 3.0V)
(13) Shipping form
    - Bare chip, QFP64
(14) The development tool
    - Evaluation chip : LC5797
    - Emulator : EVA520 + TB5739 + DCB-1A

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Número de pieza
componentes Descripción
PDF
Fabricante
4-Bit Microcontroller with 2K-Byte ROM, 64 × 4Bits RAM and LCD Driver
Ver
SANYO -> Panasonic
CMOS LSI LCD Driver ROM 8K/6K/4K × 16-bit RAM 512 × 4-bit LCD Driver ROM 8K/6K/4K × 16-bit 4-bit single chip microcontroller ( Rev : V2 )
Ver
SANYO -> Panasonic
4-bit Microcontroller with LCD Driver
Ver
Myson Century Inc
4-Bit Microcontroller with LCD Driver
Ver
SANYO -> Panasonic
8-Bit Single Chip Microcontroller with 64K-Byte ROM and 512-Byte RAM On Chip
Ver
SANYO -> Panasonic
4-Bit Single Chip Microcomputer (On-Chip LCD Driver, 12K/16K-Byte ROM, 1K-Bit RAM)
Ver
SANYO -> Panasonic
8-Bit Single Chip Microcontroller with 64/48/32K-Byte ROM and 1024-Byte RAM On Chip
Ver
SANYO -> Panasonic
8-Bit Single Chip Microcontroller with 16/12/08K-Byte ROM and 640-Byte RAM On Chip
Ver
SANYO -> Panasonic
8-Bit Single Chip Microcontroller with 16/12/08K-Byte ROM and 640-Byte RAM On Chip
Ver
SANYO -> Panasonic
4K-Byte ROM-Contained Single-Chip 4-Bit Microcomputers with FLT, LED Drivers
Ver
SANYO -> Panasonic

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Russianрусский

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]