DESCRIPTION
The LTM®4616 is a complete dual 2-phase 8A per channel switch mode DC/DC power regulator system in a 15mm × 15mm surface mount LGA or BGA package. Included in the package are the switching controller, power FETs, inductor and all support components. Operating from an input voltage range of 2.7V to 5.5V, the LTM4616 supports two outputs within a voltage range of 0.6V to 5V, each set by a single external resistor. This high efficiency design delivers up to 8A continuous current (10A peak) for each output. Only bulk input and output capacitors are needed, depending on ripple requirement. The part can also be configured for a 2-phase single output at up to 16A.

FEATURES
■ Complete Dual DC/DC Regulator System
■ Input Voltage Range: 2.7V to 5.5V
■ Dual 8A Outputs, or Single 16A Output with a 0.6V
   to 5V Range
■ Output Voltage Tracking and Margining
■ ±1.75% Total DC Output Error (–55°C to 125°C)
■ Current Mode Control/Fast Transient Response
■ Power Good Tracking and Margining
■ Overcurrent/Thermal Shutdown Protection
■ Onboard Frequency Synchronization
■ Spread Spectrum Frequency Modulation
■ Multiphase Operation
■ Selectable Burst Mode® Operation
■ Output Overvoltage Protection
■ SnPb (BGA) or RoHS Compliant (LGA and BGA)
   Finish
■ Small Surface Mount Footprint, Low Profile
   (15mm × 15mm × 2.82mm) LGA and
   (15mm × 15mm × 3.42mm) BGA Packages

APPLICATIONS
■ Telecom, Networking and Industrial Equipment
■ Storage and ATCA, PCI Express Cards
■ Battery Operated Equipment