Overview
The M16C/80 group of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/80 Series CPU core and are packaged in a 100-pin and 144-pin plastic molded QFP. The peripheral functions of 100-pin and 144-pin are common. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 16M bytes of address space, they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications.

FEATUREs
• Memory capacity..................................ROM (See ROM expansion figure.)
                                                                RAM 10 to 24 Kbytes
• Shortest instruction execution time ......50ns (f(XIN)=20MHz)
• Supply voltage .....................................4.2 to 5.5V (f(XIN)=20MHz)
                                                                Mask ROM, external ROM and flash memory versions
                                                                2.7 to 5.5V (f(XIN)=10MHz)
                                                                Mask ROM, external ROM and flash memory versions
• Low power consumption ......................45mA (M30800MC-XXXFP)
                                                                (f(XIN) = 20MHz without software wait,Vcc=5V)
• Interrupts..............................................29 internal and 8 external interrupt sources,
                                                                5 software interrupt
                                                                sources; 7 levels (including key input interrupt)
• Multifunction 16-bit timer......................5 output timers + 6 input timers
• Serial I/O ..............................................5 channels for UART or clock synchronous
• DMAC ..................................................4 channels (trigger: 31 sources)
• DRAMC................................................Used for EDO, FP, CAS before RAS refresh, self-refresh
• A/D converter .......................................10 bits X 8 channels (Expandable up to 10 channels)
• D/A converter .......................................8 bits X 2 channels
• CRC calculation circuit.........................1 circuit
• XY converter ........................................1 circuit
• Watchdog timer....................................1 line
• Programmable I/O ...............................87 lines:100-pin version, 123 lines:144-pin version
• Input port..............................................1 line (P85 shared with NMI pin)
• Memory expansion ..............................Available (16M bytes)
• Chip select output ................................4 lines
• Clock generating circuit .......................2 built-in clock generation circuits
                                        (built-in feedback resistance, and external ceramic or quartz oscillator)

APPLICATIONs
   Audio, cameras, office equipment, communications equipment,
   portable equipment, etc.