DESCRIPTION
The M50LPW041 is a 4 Mbit (512Kb x8) nonvolatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage (3.0 to 3.6V) supply. For fast programming and fast erasing in production lines an optional 12V power supply can be used to reduce the programming and the erasing times.

■ SUPPLY VOLTAGE
   – VCC = 3V to 3.6V for Program, Erase and
      Read Operations
   – VPP = 12V for Fast Program and Fast Erase
■ LOW PIN COUNT (LPC)
   – Standard Interface for embedded operation
      with PC Chipsets that are without
      automapping memory features
■ ADDRESS/ADDRESS MULTIPLEXED
   – A/A Mux Interface for programming equipment
      compatibility
■ LOW PIN COUNT (LPC) HARDWARE
   INTERFACE MODE
   – 5 Signal Communication Interface supporting
      Read and Write Operations
   – Hardware Write Protect Pins for Block Protection
   – Register Based Read and Write Protection
   – 5 Additional General Purpose Inputs for plat
      form design flexibility
   – Synchronized with 33MHz PCI clock
■ BYTE PROGRAMMING TIME
   – Single Byte Mode: 10µs (typical)
   – Quadruple Byte Mode: 2.5µs (typical)
■ 8 UNIFORM 64 Kbyte MEMORY BLOCKS
■ PROGRAM/ERASE CONTROLLER
   – Embedded Byte Program and Block/Chip
      Erase algorithms
   – Status Register Bits
■ PROGRAM and ERASE SUSPEND
   – Read other Blocks during Program/Erase
      Suspend
   – Program other Blocks during Erase Suspend
■ FOR USE in PC BIOS APPLICATIONS
■ ELECTRONIC SIGNATURE
   – Manufacturer Code: 20h
   – Device Code: 3Ch