General Description
The MAX14676/MAX14676A are battery-charge-management solutions ideal for low-power wearable applications. These devices include a linear battery-charger with a Smart Power Selector™, ModelGauge™ fuel gauge, and several power-optimized peripherals. They feature an ultra-low-power buck regulator with a quiescent current of 900nA (typical) and 74% efficiency with 10µA output.
The battery charger features Smart Power Selector operation, allowing operation with dead battery. It limits input current based on a register setting. If the charger power source is unable to supply the entire system load, the smart power control circuit will supplement the system load with current from the battery.

FEATUREs and Beneits
● Extend System Use Time Between Battery Charging
   • 1.8V Low-IQ 200mA Buck Regulator
      - 0.9μA(typ) Quiescent Current
      - Automatic Burst or Forced-PWM Modes
   • ModelGauge with Accurate State-of-Charge
● Easy-to-Implement Li+ Battery Charging
   • Smart Power Selector
   • 28V Tolerant Input
   • Thermistor Monitor
● Minimize Power-Management Footprint though High
   Integration
   • 3.2V Low-IQ 100mA LDO
   • 2.0V Always-On 50μA LDO
   • +5V Safe Output LDO
   • 6.6V Low-IQ 120μA Charge Pump
● Support a Wide Variety of Display Options
   • 5V to 17V Output Boost Converter
   • 3-Channel Adjustable High-Voltage Current Sinks
● Optimize System Control
   • Pushbutton to Enable Ultra-Low-Power Mode and
      Power-On Voltage Sequencing
   • I2C Control

APPLICATIONs
● Wearable Electronics
● GPS Watches
● Fitness Monitors
● Portable Medical Devices