datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  Maxim Integrated  >>> MAX2077CTK PDF

MAX2077CTK Hoja de datos - Maxim Integrated

MAX2077 image

Número de pieza
MAX2077CTK

componentes Descripción

Other PDF
  no available.

PDF
DOWNLOAD     

page
19 Pages

File Size
1.1 MB

Fabricante
MaximIC
Maxim Integrated MaximIC

General Description
The MAX2077 octal-channel ultrasound front-end is a fully integrated, bipolar, high-density, octal-channel ultrasound receiver optimized for low-cost, high-channel count, high-performance portable and cart-based ultrasound systems. The easy-to-use IC allows the user to achieve high-end 2D and PW imaging capability using substantially less space and power. The highly compact imaging receiver lineup, including a low-noise amplifier (LNA), variable-gain amplifier (VGA), and anti alias filter (AAF), achieves an ultra-low 2.4dB noise figure at RS = RIN = 200Ω at a very low 64.8mW per channel power dissipation. The full imaging receiver channel has been optimized for second-harmonic imaging with -64dBFS second-harmonic distortion performance with a 1VP-P 5MHz output signal and broad band SNR of > 68dB* at 20dB gain. The bipolar front-end has also been optimized for excellent low velocity PW and color-flow Doppler sensitivity with an exceptional near-carrier SNR of 140dBc/Hz at 1kHz off set from a 5MHz 1VP-P output clutter signal.


FEATUREs
♦ 8 Full Channels of LNA, VGA, and AAF in a Small,
   8mm x 8mm, 56-Pin or 10mm x 10mm, 68-Pin
   TQFN Package
♦ Ultra-Low Full-Channel Noise Figure of 2.4dB at
   RIN = RS = 200Ω
♦ Low Output-Referred Noise of 23nV/√Hz at 5MHz,
   20dB Gain, Yielding a Broadband SNR of 68dB*
   for Excellent Second-Harmonic Imaging
♦ High Near-Carrier SNR of 140dBc/Hz at 1kHz
   Offset from a 5MHz, 1VP-P Output Signal, and
   20dB of Gain for Excellent Low-Velocity PW and
   Color-Flow Doppler Sensitivity in a High-Clutter
   Environment
♦ Ultra-Low Power 64.8mW per Full-Channel (LNA,
   VGA, and AAF) Normal Imaging Mode
♦ Selectable Active Input-Impedance Matching of
   50Ω, 100Ω, 200Ω, and 1kΩ
♦ Wide Input-Voltage Range of 330mVP-P in High LNA
   Gain Mode and 550mVP-P in Low LNA Gain Mode
♦ Integrated Selectable 3-Pole 9MHz, 10MHz,
   15MHz, and 18MHz Butterworth AAF
♦ Fast-Recovery, Low-Power Modes (< 2µs)
♦ Pin Compatible with the MAX2078 Ultrasound
   Front-End with CW Doppler (MAX2077 68-Pin
   Package Variant)


APPLICATIONs
   Medical Ultrasound Imaging
   Sonar

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Número de pieza
componentes Descripción
PDF
Fabricante
Octal Ultrasound Analog Front End
Ver
Analog Devices
Octal-Channel Ultrasound Front-End with CW Doppler Mixers
Ver
Maxim Integrated
Octal-Channel Ultrasound Front-End with CW Doppler Mixers ( Rev : 2009 )
Ver
Maxim Integrated
Octal E1 Analog Front End
Ver
Cirrus Logic
Video Front End
Ver
Elantec -> Intersil
FM FRONT-END
Ver
Contek Microelectronics
Analog Front End
Ver
STMicroelectronics
Two-Channel Analog Front End
Ver
Microchip Technology
Video Front End
Ver
Elantec -> Intersil
Video Front End
Ver
Renesas Electronics

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Russianрусский

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]