datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  Maxim Integrated  >>> MAX3946ETG_10 PDF

MAX3946ETG_10 Hoja de datos - Maxim Integrated

MAX3946_10 image

Número de pieza
MAX3946ETG_10

Other PDF
  no available.

PDF
DOWNLOAD     

page
28 Pages

File Size
1.8 MB

Fabricante
MaximIC
Maxim Integrated MaximIC

General Description
The MAX3946 is a +3.3V, multirate, low-power laser diode driver designed for Ethernet and Fibre Channel transmission systems at data rates up to 11.3Gbps. This device is optimized to drive a differential transmitter optical subassembly (TOSA) with a 25I flex circuit. The unique design of the output stage enables use of unmatched TOSAs, greatly reducing headroom limitations and lowering power consumption.
The device receives differential CML-compatible signals with on-chip line termination. It can deliver laser modulation current of up to 80mA, at an edge speed of 22ps (20% to 80%), into a 5I to 25I external differential load. The device is designed to have a symmetrical output stage with on-chip back terminations integrated into its outputs. A high-bandwidth, fully differential signal path is implemented to minimize deterministic jitter. An equalization block can be activated to compensate for the SFP+ connector. The integrated bias circuit provides programmable laser bias current up to 80mA. Both the laser bias generator and the laser modulator can be disabled from a single pin.
A 3-wire digital interface reduces the pin count and permits adjustment of input equalization, pulse-width adjustment, Tx polarity, Tx deemphasis, modulation current, and bias current without the need for external components. The MAX3946 is available in a 4mm x 4mm, 24-pin TQFN package.


FEATUREs
♦ 225mW Power Dissipation Enables < 1W SFP+ Modules
♦ Up to 100mW Power Consumption Reduction by Enabling the Use of Unmatched FP/DFB TOSAs
♦ Supports SFF-8431 SFP+ MSA and SFF-8472 Digital Diagnostic
♦ 225mW Power Dissipation at 3.3V (IMOD = 40mA, IBIAS = 60mA Assuming 25I TOSA)
♦ Single +3.3V Power Supply
♦ Up to 11.3Gbps (NRZ) Operation
♦ Programmable Modulation Current from 10mA to 100mA (5Ω Load)
♦ Programmable Bias Current from 5mA to 80mA
♦ Programmable Input Equalization
♦ Programmable Output Deemphasis
♦ 25Ω Output Back Termination at TOUT+ and TOUT
♦ DJ Performance 7psP-P with Mismatched Differential Load (5Ω)
♦ DJ Performance 5psP-P with Mismatched Differential Load (25Ω)
♦ DJ Performance 5psP-P with 50Ω Differential Load
♦ Programmable Pulse Width
♦ Edge Transition Times of 22ps
♦ Bias Current Monitor
♦ Integrated Eye Safety Features
♦ 3-Wire Digital Interface
♦ -40°C to +95°C Operation


APPLICATIONs
   4x/8x FC SFP+ Optical Transceivers
   10GFC SFP+ Optical Transceivers
   10GBASE-LR SFP+ Optical Transceivers
   10GBASE-LRM SFP+ Optical Transceivers
   OC192-SR XFP/SFP+ SDH/SONET Transceivers

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Número de pieza
componentes Descripción
PDF
Fabricante
1Gbps to 11.3Gbps, SFP+ Laser Driver with Laser Impedance Mismatch Tolerance
Ver
Maxim Integrated
11.3Gbps Laser Diode Driver
Ver
Micrel
1.0625Gbps to 11.3Gbps, SFP+ Dual-Path Limiting Amplifier
Ver
Maxim Integrated
11.3Gbps, Low-Power, DC-Coupled Laser Driver
Ver
Maxim Integrated
155Mbps to 622Mbps SFF/SFP Laser Driver with Extinction Ratio Control ( Rev : 2004 )
Ver
Maxim Integrated
155Mbps to 622Mbps SFF/SFP Laser Driver with Extinction Ratio Control
Ver
Maxim Integrated
Laser Driver
Ver
Sony Semiconductor
Laser Driver
Ver
Agere -> LSI Corporation
Laser Driver
Ver
Sony Semiconductor
Laser Driver
Ver
Sony Semiconductor

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Russianрусский

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]