General Description
The dual MAX492, quad MAX494, and single MAX495 operational amplifiers combine excellent DC accuracy with rail-to-rail operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (+2.7V to +6V) or split supplies (±1.35V to ±3V). Each op amp requires less than 150µA supply current. Even with this low current, the op amps are capable of driving a 1kΩ load, and the input referred voltage noise is only 25nV/√Hz. In addition, these op amps can drive loads in excess of 1nF.
FEATUREs
♦ Low-Voltage Single-Supply Operation (+2.7V to +6V)
♦ Rail-to-Rail Input Common-Mode Voltage Range
♦ Rail-to-Rail Output Swing
♦ 500kHz Gain-Bandwidth Product
♦ Unity-Gain Stable
♦ 150µA Max Quiescent Current per Op Amp
♦ No Phase Reversal for Overdriven Inputs
♦ 200µV Offset Voltage
♦ High Voltage Gain (108dB)
♦ High CMRR (90dB) and PSRR (110dB)
♦ Drives 1kΩ Load
♦ Drives Large Capacitive Loads
♦ MAX495 Available in µMAX Package—8-Pin SO
APPLICATIONs
Portable Equipment
Battery-Powered Instruments
Data Acquisition
Signal Conditioning
Low-Voltage Applications