General Description
The MAX951–MAX954 feature combinations of a micropower operational amplifier, comparator, and reference in an 8-pin package. In the MAX951 and MAX952, the comparator’s inverting input is connected to an internal 1.2V ±2% bandgap reference. The MAX953 and MAX954 are offered without an internal reference.
The MAX951/MAX952 operate from a single 2.7V to 7V supply with a typical supply current of 7μA, while the MAX953/MAX954 operate from 2.4V to 7V with a 5μA typical supply current. Both the op amp and comparator feature a common mode input voltage range that extends from the negative supply rail to within 1.6V of the positive rail, as well as output stages that swing Rail-to-Rail®.

FEATUREs
● Op Amp + Comparator + Reference in an 8-Pin
   μMAX Package (MAX951/MAX952)
● 7μA Typical Supply Current (Op Amp + Comparator +
   Reference)
● Comparator and Op Amp Input Range Includes
   Ground
● Outputs Swing Rail to Rail
● 2.4V to 7V Supply Voltage Range
● Unity-Gain Stable and 125kHz Decompensated
   AV ≥ 10V/V Op Amp Options
● Internal 1.2V ±2% Bandgap Reference
● Internal Comparator Hysteresis
● Op Amp Capable of Driving up to 1000pF Load

APPLICATIONs
● Instruments, Terminals, and Bar-Code Readers
● Battery-Powered Systems
● Low-Frequency, Local-Area Alarms/Detectors
● Photodiode Preamps
● Smart Cards
● Infrared Receivers for Remote Controls
● Smoke Detectors and Safety Sensors