■ DESCRIPTION
The MB86613 a high-performance, host-bus (PCI) and serial-bus (1394) controller chip for controlling transfer between the PCI and 1394 buses. This chip conforms to the PCI Standard Version 2.1 for PCI control, the IEEE 1394-1995 Standard for 1394 control, and the Open HCI Standard Version 1.0 for PCI-1394 control.

■ FEATURES
1. 1394 serial bus controller Unit
    • Compliant with IEEE 1394-1995 Standard
    • PHYsical and LINK layer modules integrated on a single chip
    • Three internal ports
    • Transfer rates of S100, S200, and S400 supported
    • On-chip PLL for generating 400-MHz (PHY) and 50-MHz (LINK) CLK signals
    • Built-in cycle master function
    • Bus management CSR (control and status register)
    • Six-conductor cable supported
    • Internal transceiver and comparator
    • Internal comparator for cable power detection

2. Context program controller unit
    • Compliant with Open HCI Standard (Draft 1.00)
    • Thirteen context program controllers integrated:
    • Internal 6-KB FIFO buffers
        Asynchronous Transmit DMA …2ch
            •Asynchronous response …1ch
            •Asynchronous request …1ch
        Isochronous Transmit DMA …4ch
        Receive DMA …7ch
            •Asynchronous response …1ch
            •Asynchronous request …1ch
            •Isochronous …4ch
    •SelfID …1ch
        Asynchronous Transmit FIFO …1.5 Kbyte
        isochronous Transmit FIFO …1.5 Kbyte
        Asynchronous/Isochronous Receive FIFO …3.0 Kbyte

3. PCI bus controller unit
    • Compliant with PCI Standard (Revision 2.2)
    • On-chip 32-bit DMA controller
    • Built-in power management function (Compliant with PCI bus power management standard version 1.0)
    • Built-in alignment function
    • Built-in byte swap function
    • Operating frequency of up to 33 MHz
    • Internal parallel ROM interface
    • Internal serial ROM interface
    • Internal universal (5/3.3 V shared) PCI buffer

4. Physical specifications
    • Package: LQFP144 (FPT-144P-M08), FBGA176 (BGA-176P-M02)
    • Power-supply voltage: Dual system for 5 V (± 5%) and 3.3 V (± 5%)

5. Reference standards
    • IEEE Standard for a High Performance 1394-1995
    • 1394 Open Host Controller Interface Specification (Release 1.00)
    • PCI Specification (Revision 2.2)
    • PCI Bus Power Management Interface Specification (Version 1.0)