Advanced Digital Video Encoder Y/Cb/Cr Output Support HCMOS Technology
The MC44722A and MC44723A are advanced Digital Video Encoders (DVE). They convert ITU-601/656 standard 4:2:2 BitParalellel data into analog composite video, S-Video or analog component signals Y/Cb/Cr in PAL and NTSC formats. They accept the multiplexed two 8-bit or 16-bit ((CB,Y,CR)Y) signals from digital sources such as MPEG decoders and can act as a sync generator master or as a sync slave. All video processing is done digitally and requires no external adjustment.
Specifically designed for digital satellite, digital cable decoders, multimedia terminals and DVD players.
• World Wide Operation (PAL-BDGHI, PAL-N,PAL-M, NTSC-M)
• SMPTE 170M / ITU - R 624 composite video output
• Programmable Color Sub-carrier Frequencies
• Analog standard timing for Horizontal, Vertical, Frame and Composite Sync Outputs
• Sync Extraction From Digital Input Data (SAV, EAV)
• Sync Polarity and Horizontal / Vertical Phase Control
• Master or Slave Sync (H/Vsync, H/Fsync, ITU-R656 Slave) Operation
• Interlaced or Non-Interlaced Support
• 625/50 or 525/60 ITU-601/656 two 8-bit or 16-bit ((CB,Y,CR)Y) Digital Input
• Luma 2X / Chroma 4X Output interpolating Filter
• Dual Digital A / B selectable inputs
• External VBI Information Data Input (Teletext Information Data)
• Selectable One set of Signal within (CVBS/Y/C) or (Y/Cb/Cr)
• Selectable Analog Component Output ( Beta Cam or MII Component Interface Level )
• Three Analog Outputs Through 10-bit DACs
• Easily programmed via Serial Bus ( I2C or 4-Wired SPI Bus)
• 2 Hardware selectable I2C Chip Addresses
• Closed-Caption, CGMS and WSS Information data Insertion
• MACROVISION ver. 7.01 Anti-Copy Signal Insertion(MC44722A Only)
• On Chip Color - bar Generator
• 5V Tolerante Input
• +3.3V Power Supply or +3.3V(Digital)/+5V(Analog) Power Supply
• Pin Compatible with MC44722/3