General Description
Introduction
The MC68HC908AP64A is a member of the low-cost, high-performance M68HC08 Family of 8-bit microcontroller units (MCUs). All MCUs in the family use the enhanced M68HC08 central processor unit (CPU08) and are available with a variety of modules, memory sizes and types, and package types.

FEATUREs
Features of the MC68HC908AP64A include the following:
• High-performance M68HC08 architecture
• Fully upward-compatible object code with M6805, M146805, and M68HC05 Families
• Maximum internal bus frequency:
   – 8-MHz at 5V operating voltage
• Clock input options:
   – RC-oscillator
   – 1- to 8-MHz crystal-oscillator with 32MHz internal PLL
• User program FLASH memory with security(1) feature
   – 62,368 bytes for MC68HC908AP64A
   – 32,768 bytes for MC68HC908AP32A
   – 16,384 bytes for MC68HC908AP16A
   – 8,192 bytes for MC68HC908AP8A
• On-chip RAM
   – 2,048 bytes for MC68HC908AP64A and MC68HC908AP32A
   – 1,024 bytes for MC68HC908AP16A and MC68HC908AP8A
• Two 16-bit, 2-channel timer interface modules (TIM1 and TIM2) with selectable input capture, output compare, and PWM capability on each channel
• Timebase module
• Serial communications interface module 1 (SCI)
• Serial communications interface module 2 (SCI) with infrared (IR) encoder/decoder
• Serial peripheral interface module (SPI)
• System management bus (SMBus), version 1.0/1.1 (multi-master IIC bus)
• 8-channel, 10-bit analog-to-digital converter (ADC)
• IRQ1 external interrupt pin with integrated pullup
• IRQ2 external interrupt pin with programmable pullup
• 8-bit keyboard wakeup port with integrated pullup
• 32 general-purpose input/output (I/O) pins:
   – 31 shared-function I/O pins
   – 8 LED drivers (sink)
   – 6 × 25mA open-drain I/O with pullup
• Low-power design (fully static with stop and wait modes)
• Master reset pin (with integrated pullup) and power-on reset
• System protection features
   – Optional computer operating properly (COP) reset, driven by internal RC oscillator
   – Low-voltage detection with optional reset or interrupt
   – Illegal opcode detection with reset
   – Illegal address detection with reset
• 48-pin low quad flat pack (LQFP), 44-pin quad flat pack (QFP), and 42-pin shrink dual-in-line package (SDIP)
• Specific features of the MC68HC908AP64A in 42-pin SDIP are:
   – 30 general-purpose l/Os only
   – External interrupt on IRQ1 only

FEATUREs of the CPU08 include the following:
• Enhanced HC05 programming model
• Extensive loop control functions
• 16 addressing modes (eight more than the HC05)
• 16-bit Index register and stack pointer
• Memory-to-memory data transfers
• Fast 8 × 8 multiply instruction
• Fast 16/8 divide instruction
• Binary-coded decimal (BCD) instructions
• Optimization for controller applications
• Efficient C language support