General Description
The MIC3003GFL is a fiber optic module controller which enables the implementation of sophisticated, hot-pluggable fiber optic transceivers with intelligent laser control and an
internally calibrated Digital Diagnostic Monitoring Interface per SFF-8472. It essentially integrates all non-data path functions of an SFP/SFP+ transceiver into a tiny (3mm x 3mm) MLF® package. It also works well as a microcontroller peripheral in transponders or 10Gbps transceivers. The MIC3003GFL uses the same die as the MIC3003 with all its functions, but in a smaller package and different pin out.

FEATUREs
• Packaged in a ultra small (3mm x 3mm) 24-pin MLF® package
• Extended temperature range
• Alarms and warnings interrupt and TXFAULT masks
• Capability to support up to four devices on one SMBus
• APC or constant-current laser bias
• Turbo mode for APC loop start-up and shorter laser turn on time
• Supports multiple laser types and bias circuit topologies
• Integrated digital temperature sensor
•Temperature compensation of modulation, bias, bias fault and alarm thresholds via NVRAM look-up tables
• NVRAM to support GBIC/SFP serial ID function
• User writable EEPROM scratchpad
• Reset signal compatible with some new systems requirements
• Diagnostic monitoring interface per SFF-8472
 –  Monitors and reports critical parameters: temperature, bias current, TX and RX optical power, and supply voltage
 –  S/W control and monitoring of TXFAULT, RXLOS, RATESELECT, and TXDISABLE
 –  Internal or external calibration
 –  EEPOT for adjusting RX power measurement
• Power-on hour meter
• Interrupt capability
• Extensive test and calibration features
• 2-wire SMBus-compatible serial interface
• SFP/SFP+ MSA and SFF-8472 compliant
• 3.0V to 3.6V power supply range
• 5V-tolerant I/O

Applications
• SFP/SFP+ optical transceivers
• SONET/SDH transceivers and transponders
• Fibre Channel transceivers
• 10Gbps transceivers
• Free space optical communications
• Proprietary optical links