MN103SB9 Series

Interrupts
  RESET. IRQ × 9. NMI. Timer × 28. I2
  C × 3. SIF × 10. DMA × 12. WDT. A/D. Time base timer × 2. System error 
Timer Counter
  8-bit timer × 10 Reload-down count. Cascade connection possible (usable as a 16-bit to 32-bit timer)
  16-bit timer × 6 Up-down count. Input capture. PWM output. Compare/capture register 2channnels
  Time base timer × 1
  Watchdog timer × 1
Serial interface
  UART/Synchronous/Multi-master I2C interface selective × 3
  UART/Synchronous interface selective × 2
DMA controller
  Number of channels: 4channels
  Unit of transfer: 8/16/32bits
  Maximum transfer cycles: 65535
  Starting factor: External interrupt. Timer. Serial transmission/reception. A/D conversion finish. I2C transmission/reception. External transmission request. Software
  Transfer method: 2-bus cycle transfer
  Adressing modes: Fixed. Increment. Decrement
  Transfer mode: Word transfer. Burst transfer. Intermittent transfer
Extended Calculation
  Multiply and accumulate arithmetic. Multiplication. Saturated arithmetic
I/O Pins
  I/O 104: Common use
A/D converter
  10-bit × 12channels
ROM Correction
 8 channels