GENERAL DESCRIPTION
The NJU6538 is a 10-common x 65-segment bitmap LCD driver to display graphics or characters.
It contains 650 bits display data RAM, microprocessor interface circuit, common and segment drivers, key scan circuit, and general output ports.
An image data from MPU through the serial interface is stored into the 650 bits internal displayed on the LCD panel through the commons and segments drivers.
FEATURES
● Direct Correspondence between Display Data RAM and LCD Pixel
● Display Data RAM : 650-bits
● LCD Drivers : 65-seg, 10-com
● Serial interface (SIO, SCL, CS)
● Programmable Duty Ratio
1/8 Duty 7-common x 65-segment + 1-icon common
1/9 Duty 7-common x 65-segment + 2-icon common
1/10Duty 7-common x 65-segment + 3-icon common
● Bias Ratio 1/4 bias
● 25-key scan Function (5 x 5 matrix) Needless for anti-reverse current diodes in key scan
● general Output Ports with 128-steps PWM output (possible LED driving) maximum 4-ports
● Useful Instruction Set
Display ON/OFF, Page Address Set, Column Address Set, Display Data write, ADC Select, Inverse Display ON/OFF, whole display ON/OFF, Reset, EVR Register Set, Duty Select, Power Save mode set, General Output Port PWM phase / frequency set, General Output Port PWM data set, General Output Port / Key scan output select
● Bleeder Resistance On-chip
● Software Contrast Control (16 steps)
● Operating Voltage
Logic Operating Voltage 2.7 to 5.5V
LCD Driving Voltage 5.0 to 10.0V
● Package Outline QFP100-G1 QFP100-C2
● C-MOS Technology (Substrate: P)