DESCRIPTION
TheNexFlash NX29F010 is a 1 Megabit (131,072 bytes) single 5.0V-only Sectored Flash Memory. The NX29F010 provides in-system programming with the standard system 5.0V-only Vcc supply and can be programmed or erased in standard PROM programmers.

FEATURES
• Ultra-fast Performance
    – 35, 45, 55, 70, and 90 ns max. access times
• Temperature Ranges
    – Commercial 0oc-70oc
    – Industrial -40oc-85oc
• Single 5V-only Power Supply
    – 5V ± 10% for Read, Program, and Erase
• CMOS Low Power Consumption
    – 20 mA (typical) active read current
    – 30 mA (typical) Program/Erase current
• Compatible with JEDEC-Standard Pinouts
    – 32-pin DIP, PLCC, TSOP
• Program/function Compatible with AM29F010
    – No system firmware changes
    – Uses same PROM programer algorithm
• Flexible sector architecture
    – Erase any of eight uniform sectors or full chip erase
    – Sector protection/unprotection using PROM programming equipment
• 100,000 Program/Erase cycles
• Embedded algorithms
    – Automatically programs and verifies data at specified address
    – Auto-programs and erases the chip or any designated sector
• Data/Polling and Toggle Bits
    – Detect program or erase cycle completion