Overview
The SH7144 Group and SH7145 Group single-chip RISC (Reduced Instruction Set Computer) microcomputers integrate a Renesas Technology original RISC CPU core with peripheral functions required for system configuration.
The SH7144 Group and SH7145 Group CPU has a RISC-type instruction set. Most instructions can be executed in one state (one system clock cycle), which greatly improves instruction execution speed. In addition, the 32-bit internal-bus architecture enhances data processing power. With this CPU, it has become possible to assemble low cost, high performance/high-functioning systems, even for applications that were previously impossible with microcomputers, such as realtime control, which demands high speeds.
FEATUREs
• Central processing unit with an internal 32-bit RISC (Reduced Instruction Set Computer) architecture
― Instruction length: 16-bit fixed length for improved code efficiency
― Load-store architecture (basic operations are executed between registers)
― Sixteen 32-bit general registers
― Five-stage pipeline
― On-chip multiplier: multiplication operations (32 bits × 32 bits → 64 bits) executed in two to four cycles
― C language-oriented 62 basic instructions
• Various peripheral functions
― Direct memory access controller (DMAC)
― Data transfer controller (DTC)
― Multifunction timer/pulse unit (MTU)
― Compare match timer (CMT)
― Watchdog timer (WDT)
― Asynchronous or clocked synchronous serial communication interface (SCI)
― I2C bus interface (IIC)*1
― 10-bit A/D converter
― Clock pulse generator
― User break controller (UBC)
― User debugging interface (H-UDI)*2
― Advanced user debugger (AUD)*2
Notes: 1. Option
2. Supported only for flash memory version.