Introduction
The SEROCCO-H is a Serial Communication Controller with two independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC and DSCC4 device family providing a large set of protocol support and variety in serial interface configuration. This allows easy integration to different environments and applications.

FEATUREs
Serial communication controllers (SCCs)
• Two independent channels
• Full duplex data rates on each channel of up to 12.5 Mbit/s sync - 2 Mbit/s with DPLL
• 64 Bytes deep receive FIFO per SCC
• 64 Bytes deep transmit FIFO per SCC

Serial Interface
• On-chip clock generation or external clock sources
• On-chip DPLLs for clock recovery
• Baud rate generator
• Clock gating signals
• Clock gapping capability
• Programmable time-slot capability for connection to TDM interfaces (e.g. T1, E1)
• NRZ, NRZI, FM and Manchester data encoding
• Optional data flow control using modem control lines (RTS, CTS, CD)
• Support of bus configuration by collision detection and resolution

Bit Processor Functions
• HDLC/SDLC Protocol Modes
    – Automatic flag detection and transmission
    – Shared opening and closing flag
    – Generation of interframe-time fill ’1’s or flags
    – Detection of receive line status
    – Zero bit insertion and deletion
    – CRC generation and checking (CRC-CCITT or CRC-32)
    – Transparent CRC option per channel and/or per frame
    – Programmable Preamble (8 bit) with selectable repetition rate
    – Error detection (abort, long frame, CRC error, short frames)
• Bit Synchronous PPP Mode
    – Bit oriented transmission of HDLC frame (flag, data, CRC, flag)
    – Zero bit insertion/deletion
    – 15 consecutive ’1’ bits abort sequence
• Octet Synchronous PPP Mode
    – Octet oriented transmission of HDLC frame (flag, data, CRC, flag)
    – Programmable character map of 32 hard-wired characters (00H-1FH)
    – Four programmable characters for additional mapping
    – Insertion/deletion of control-escape character (7DH) for mapped characters
• Extended Transparent Mode
    – Fully bit transparent (no framing, no bit manipulation)
    – Octet-aligned transmission and reception
• Protocol and Mode Independent
    – Data bit inversion
    – Data overflow and underrun detection
    – Timer
(Continue ...)