Número de pieza
PI3C32X384BE
Fabricante
Pericom Semiconductor
Description
Pericom Semiconductor’s PI3C32X384, is a 2.5V or 3.3Volt, highbandwidth 20-bit, 2-port bus switches designed with a low Onresistance allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. The switches are turned ON by the Bus Enable (BE) input signal. Four bus enable signals are provided, one for each of the upper and lower five bits of the two 10-bit buses.
FEATUREs
➤ Near-Zero propagation delay
➤ 5-ohm switches connect inputs to outputs (PI3C32X384)
➤ High Bandwidth Operation (>400 MHz)
➤ Permits Hot Insertion
➤ 5V I/O Tolerant
➤ 2.5V Supply Voltage Operation
➤ Packaging (Pb-free & Green):
□ 48-pin 150-mil wide plastic BQSOP (B)
APPLICATIONs
➤ High Bandwidth Data switching
➤ Hot Docking
Número de pieza
componentes Descripción
PDF
Fabricante
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch ( Rev : 2010 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch ( Rev : 2004 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot-Insertion, 10-Bit, 2-Port, Bus Switch
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 32-Bit, 2-Port, Bus Switch ( Rev : 1999 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 32-Bit, 2-Port, Bus Switch
Pericom Semiconductor Corporation
2.5V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch ( Rev : 1999 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch ( Rev : 2011 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 16-Bit, 2-Port, Bus Switch
Pericom Semiconductor
