ARCHITECTURE OVERVIEW
The QL5032 device in the QuickLogic QuickPCI ESP (Embedded Standard Product) family provides a complete and customizable PCI interface solution combined with 37,000 system gates of programmable logic. This device eliminates any need for the designer to worry about PCI bus compliance, yet allows for the maximum 32-bit PCI bus bandwidth (132 MB/s).

DEVICE HIGHLIGHTS
High Performance PCI Controller
■ 32-bit / 33 MHz PCI Master/Target
■ Zero-wait state PCI Master provides 132 MB/s transfer rates
■ Programmable back-end interface to optional local processor
■ Independent PCI bus (33 MHz) and local bus (up to 160 MHz) clocks
■ Fully customizable PCI Configuration Space
■ Configurable FIFOs with depths up to 256
■ Reference design with driver code (Win 95/98/Win 2000/NT4.0) available
■ PCI v2.2 compliant
■ Supports Type 0 Configuration Cycles in Target mode
■ 3.3V, 5V Tolerant PCI signaling supports Universal PCI Adapter designs
■ 3.3V CMOS in 208-pin PQFP and 256-pin PBGA
■ Supports endian conversions
■ Unlimited/Continuous Burst Transfers Supported

Extendable PCI Functionality
■ Support for Configuration Space from 0x40 to 0x3FF
■ Multi-Function, Expanded Capabilities, & Expansion ROM capable
■ Power management, Compact PCI, hot-swap/hot-plug compatible
■ PCI v2.2 Power Management Spec compatible
■ PCI v2.2 Vital Product Data (VPD) configuration support
■ Programmable Interrupt Generator
■ I2O support with local processor
■ Mailbox register support

Programmable Logic
■ 37K system gates / 390 Logic Cells
■ 16,128 RAM bits, up to 154 I/O pins
■ 250 MHz 16-bit counters, 275 MHz Datapaths, 160 MHz FIFOs
■ All back-end interface and glue-logic can be implemented on chip
■ 7 64-deep FIFOs or 3 128-deep FIFOs or a single 256-deep FIFO or a combination that requires 14 or less QuickLogic RAM Modules
■ (3) 32-bit busses interface between the PCI Controller and the Programmable Logic