Description
The ST485 is al low power transceiver for RS-485 and RS-422 communication. Each part contains
one driver and one receiver. This transceiver draw 300µA (typ.) of supply current when unloaded or fully loaded with disabled drivers. It operates from a single 5V supply.
Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that placed the driver outputs into a high-impedance state.
The ST485 is designed for bi-directional data communications on multipoint bus transmission
line (half-duplex applciations).
The ST485 is available in three temperature range: commercial (0°C to 70°C), industrial (-40°C to 85°C) and automotive (-55°C to 125°C)

General features
■ Low quiescent current: 300µA
■ Designed for RS-485 interface application
■ -7V to 12V common mode input voltage range
■ Driver maintains high impedance in 3-state or with the power OFF
■ 70mV tipycal input hysteresis
■ 30ns propagation delay, 5ns skew
■ Operate from a single 5V supply
■ Current limiting and thermal shutdown for driver overload protection
■ Allows up to 64 transceivers on the bus