Max Power 43 W BTL × 4CH Audio Power IC
The TA8262H is 4 ch BTL audio power amplifier for car audio application.
This IC can generate more high power: POUTMAX = 43 W as it is included the pure complementary PNP and NPN transistor output stage.
It is designed low distortion ratio for 4 ch BTL audio power amplifier, built-in Stand-by Function, Muting Function, Clip detector, and diagnosis circuit.
Additionally, the AUX. amplifier is built-in, it can make the beep signal etc. output to 2 channels (OUT1 and 4). It contains various kind of protectors for car audio use.
FEATUREs
High power
: POUTMAX (1) = 43 W (typ.)
(VCC= 14.4 V, JEITA max, RL= 4 Ω)
: POUTMAX (2) = 40 W (typ.)
(VCC= 13.7 V, JEITA max, RL= 4 Ω)
: POUT(1) = 28 W (typ.)
(VCC= 14.4 V, f = 1 kHz, THD = 10%, RL= 4 Ω)
: POUT(2) = 24 W (typ.)
(VCC= 13.2 V, f = 1 kHz, THD = 10%, RL= 4 Ω)
Built-in clip detector & diagnosis circuit. (pin 25)
Low distortion ratio
: THD = 0.02% (typ.)
(VCC= 13.2 V, f = 1 kHz, POUT= 5 W, RL= 4 Ω) Low noise
: VNO= 0.10 mVrms (typ.)
(VCC= 13.2 V, Rg= 0 Ω, GV= 26dB, BW = 20 Hz~20 kHz)
Built-in stand-by switch function (pin 2)
Built-in muting function (pin 24)
Built-in AUX. amplifier from single input (pin 16) to 2 channels output ; OUT1 and 4
Built-in various protection circuit
: Thermal shut down, over voltage, out to GND, out to VCC, out to out short Operating supply voltage: VCC (opr)= 9~18 V