datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  Philips Electronics  >>> TDA8008 PDF

TDA8008 Hoja de datos - Philips Electronics

TDA8008HL image

Número de pieza
TDA8008

Other PDF
  no available.

PDF
DOWNLOAD     

page
12 Pages

File Size
68.4 kB

Fabricante
Philips
Philips Electronics Philips

GENERAL DESCRIPTION
The TDA8008 is a complete, one-chip, low cost dual smart card coupler.


FEATURES
• 8xC51 core with 16 kbytes or EPROM (TDA8008), 256 bytes RAM, 512 bytes AUXRAM, Timer 0, 1, 2 and enhanced UART
• Specific ISO 7816 UART, accessible with MOVX instructions for automatic convention processing, variable baud rate through frequency or division ratio programming, error management at character level for T = 0 protocol, extra guard time register
• Dual VCC generation (5 V ±5% or 3 V ±5%), maximum current of 60 mA with controlled rise and fall times
• Dual cards clock generation (up to 10 MHz) with two times synchronous frequency doubling
• Cards clock STOP HIGH or LOW or 1.25 MHz (from an integrated oscillator) for cards power reduction mode
• Automatic activation and deactivation sequences through an independent sequencer
• Supports the asynchronous protocols T = 0 and T = 1 in accordance with ISO 7816 and EMV
• Versatile 24-bit time-out counter for Answer To Reset (ATR) and waiting times processing
• 22 ETU counter for block guard time
• Supports synchronous cards
• Current limitations on cards contacts
• Special circuitry for killing spikes during power-on or off
• Supply supervisor for Power-on reset
• Step-up converter (supply voltage from 2.7 to 5.5 V at 16 MHz), doubler, tripler or follower according to VCC and VDD
• Speed up to 25 MHz at VDD = 5 V
• Additional I/O pin allowing the use of the ISO 7816 UART for an external card interface (pin IOAUX)
• Additional interrupt pin allowing detection of level toggling on an external signal (pin INTAUX)
• Fast and efficient swapping between the 3 cards due to separate buffering of parameters for each card
• Chip select input allowing use of several devices in parallel and memory space paging
• Enhanced ESD protections on card contacts (6 kV min.)
• Software library for easy integration within the application
• Development tool with a TDA8007B and a regular emulator.


APPLICATIONS
• Multiple smart card readers for multiprotocol applications (EMV banking, digital pay TV, access control, etc.).

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Número de pieza
componentes Descripción
PDF
Fabricante
Multiprotocol Dual Smart Card Interface
Ver
Maxim Integrated
Multiprotocol IC Card coupler
Ver
Philips Electronics
Multiprotocol Dual Smart Card Interface
Ver
Dallas Semiconductor -> Maxim Integrated
Multiprotocol Dual Smart Card Interface
Ver
Maxim Integrated
Low-power smart card coupler
Ver
Philips Electronics
8-bit Microcontroller with Multiprotocol Smart Card Interface
Ver
Atmel Corporation
Multiprotocol IC card interface
Ver
NXP Semiconductors.
Dual smart card interface
Ver
Philips Electronics
Dual smart card interface
Ver
Philips Electronics
Low-power (3 V/5 V) smart card coupler
Ver
Philips Electronics

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Russianрусский

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]