GENERAL DESCRIPTION
The various versions of theTDA935X/6X/8X PS/N2 series combine the functions of a TV signal processor together with a µ-Controller and US Closed Caption decoder. Most versions have a Teletext decoder on board. The Teletext decoder has an internal RAM memory for 1or 10 page text. The ICs are intended to be used in economy television receivers with 90° and 110° picture tubes.
The ICs have supply voltages of 8 V and 3.3 V and they are mounted in S-DIP envelope with 64 pins.
The features are given in the following feature list. The differences between the various ICs are given in the table on page 4.

FEATURES
TV-signal processor
• Multi-standard vision IF circuit with alignment-free PLL
   demodulator
• Internal (switchable) time-constant for the IF-AGC circuit
• A choice can be made between versions with mono
   intercarrier sound FM demodulator and versions with
   QSS IF amplifier.
• The mono intercarrier sound versions have a selective
   FM-PLL demodulator which can be switched to the
   different FM sound frequencies (4.5/5.5/6.0/6.5 MHz).
   The quality of this system is such that the external
   band-pass filters can be omitted.
• Source selection between ‘internal’ CVBS and external
   CVBS or Y/C signals
• Integrated chrominance trap circuit
• Integrated luminance delay line with adjustable delay
   time
• Picture improvement features with peaking (with
   variable centre frequency and positive/negative
   overshoot ratio) and black stretching
• Integrated chroma band-pass filter with switchable
   centre frequency
• Only one reference (12 MHz) crystal required for the
   µ-Controller, Teletext- and the colour decoder
• PAL/NTSC or multi-standard colour decoder with
   automatic search system
• Internal base-band delay line
• RGB control circuit with ‘Continuous Cathode
   Calibration’, white point and black level offset
   adjustment so that the colour temperature of the dark
   and the light parts of the screen can be chosen
   independently.
• Linear RGB or YUV input with fast blanking for external
   RGB/YUV sources. The Text/OSD signals are internally
   supplied from the µ-Controller/Teletext decoder
• Contrast reduction possibility during mixed-mode of
   OSD and Text signals
• Horizontal synchronization with two control loops and
   alignment-free horizontal oscillator
• Vertical count-down circuit
• Vertical driver optimized for DC-coupled vertical output
   stages
• Horizontal and vertical geometry processing
• Horizontal and vertical zoom function for 16 : 9
   applications
• Horizontal parallelogram and bow correction for large
   screen picture tubes
• Low-power start-up of the horizontal drive circuit

(Continue ...)