[Melexis]

General Description
The TH8080 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which use the network. The TH8080 is designed in accordance to the physical layer definition of the LIN Protocol Specification , Rev. 1.1 . The IC furthermore can be used in ISO9141 sy

FEATUREs and Benefits
❐ Single wire LIN transceiver
❐ Compatible to LIN Protocol Specification, Rev. 1.1
❐ Compatible to ISO9141 functions
❐ Up to 20 kbps bus speed
❐ Low RFI due to slew rate control
❐ Fully integrated receiver filter
❐ Protection against load dump, jump start
❐ Bus terminals proof against short-circuits and transients in the automotive environment
❐ Very low (30 µA) typical power consumption in recessive state and therefore no sleep mode necessary
❐ Thermal overload and short circuit protection
❐ High impendance Bus pin in case of loss of ground and undervoltage condition
❐ 8-pin SOIC
❐ ±4kV ESD protection on Bus pin