INTRODUCTION
The UT80C196KD is compatible with industry standard’s MCS-96 instruction set. The UT80C196KD is supported by commercial hardware and software development tools.
The UT80C196KD accesses instruction code and data via a 16-bit address and data bus. The 16-bit bus allows the microcontroller to access 128K bytes of instruction/data memory. Integrated software and hardware timers, high speed I/O, pulse width modulation circuitry, and UART make the UT80C196KD ideal for control type applications. The CPU’s ALU supports byte and word adds and subtracts, 8 and 16 bit multiplies, 32/16 and 16/8 bit divides, as well as increment, decrement, negate, compare, and logical operations. The UT80C196KD’s interrupt controller prioritizes and vectors 18 interrupt events. Interrupts include normal interrupts and special interrupts. To reduce power consumption, the microcontroller supports software invoked idle and power down modes.
The UT80C196KD is packaged in a 68-lead quad flatpack.

FEATURES
❐ 20MHz 16-bit Microcontroller compatible with Industry Standard’s MCS-96 ISA
   - Register to Register Architecture
   - 1000 Byte Register RAM
❐ Three 8-bit I/O Ports
❐ On-board Interrupt Controller
❐ Three Pulse-Width Modulated Outputs
❐ High Speed I/O
❐ UART Serial Port
❐ Dedicated Baud Rate Generator
❐ Software and Hardware Timers
   - 16-Bit Watchdog Timer, Four 16-Bit Software Timers
   - Three 16-Bit Counter/Timers
❐ Error detection and correction for external memory accesses
❐ QML Q compliant part
❐ Standard Microcircuit Drawing 5962-98583