GENERAL DESCRIPTIONS
The W25Q40EW (4M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 1.65V to 1.95V power supply with current consumption as low as 1mA active and 1µA for power-down. All devices are offered in space-saving packages.

FEATURES
• Family of SpiFlash Memories
   – 4M-bit/512K-byte (524,288)
   – 256-byte per programmable page
   – Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
   – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
   – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
   – QPI: CLK, /CS, IO0, IO1, IO2, IO3
• Highest Performance Serial Flash
   – 104MHz Dual/Quad SPI clocks
   – 208/416MHz equivalent Dual/Quad SPI
   – 50MB/S continuous data transfer rate
   – Up to 6X that of ordinary Serial Flash
   – Min 100K Program-Erase cycles per sector
   – More than 20-year data retention
• Low Power, Wide Temperature Range
   – Single 1.65V to 1.95V supply
   – 1mA active current & <1µA Power-down current
   – -40°C to +85°C operating range
• Flexible Architecture with 4KB sectors
   – Uniform Sector Erase (4K-bytes)
   – Uniform Block Erase (32K and 64K-bytes)
   – Program one to 256 bytes
   – Erase/Program Suspend & Resume
• Advanced Security Features
   – Software and Hardware Write-Protect
   – Top/Bottom, 4KB complement array protection
   – Lock-Down and Special OTP array protection
   – 64-Bit Unique Serial Number for each device
   – Discoverable Parameters (SFDP) Register
   – 3X256-Byte Security Registers with OTP locks
   – Volatile & Non-volatile Status Register Bits
• Space Efficient Packaging:
   – 8-pin SOIC / VSOP 150-mil
   – 8-pad WSON 6X5-mm
   – USON8 2X3mm / 4x3-mm
   – 8-ball WLCSP
   – Contact Winbond for KGD and other