GENERAL DESCRIPTION
The W29C102 is a 1-megabit, 5-volt only CMOS flash memory organized as 64K x 16 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W29C102 results in fast program/erase operations with extremely low current consumption (compared to other comparable 5-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers.
FEATURES
• Single 5-volt program and erase operations
• Fast page-write operations
- 128 words per page
- Page program cycle: 10 mS (max.)
- Effective word-program cycle time: 39 μS
- Optional software-protected data write
• Fast chip-erase operation: 50 mS
• Read access time: 70/90/120 nS
• Typical page program/erase cycles: 1K/10K
• Ten-year data retention
• Software and hardware data protection
• Low power consumption
- Active current: 25 mA (typ.)
- Standby current: 20 μA (typ.)
• Automatic program timing with internal VPP
generation
• End of program detection
- Toggle bit
- Data polling
• Latched address and data
• TTL compatible I/O
• JEDEC standard word-wide pinouts
• Available packages: 40-pin 600 mil DIP, TSOP
and 44-pin PLCC