GENERAL DESCRIPTION
The W49F002U is a 2-megabit, 5-volt only CMOS flash memory organized as 256K ´ 8 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W49F002U results in fast program/erase operations with extremely low current consumption (compared to other comparable 5-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers.

FEATURES
· Single 5-volt operations:
   - 5-volt Read
   - 5-volt Erase
   - 5-volt Program
· Fast Program operation:
   - Byte-by-Byte programming: 35 mS (typ.)
· Fast Erase operation: 100 mS (typ.)
· Fast Read access time: 70/90/120 nS
· Endurance: 10K cycles (typ.)
· Ten-year data retention
· Hardware data protection
· One 16K byte Boot Block with Lockout protection
· Two 8K byte Parameter Blocks
· Two Main Memory Blocks (96K, 128K) Bytes
· Low power consumption
   - Active current: 25 mA (typ.)
   - Standby current: 20 mA (typ.)
· Automatic program and erase timing with internal VPP generation
· End of program or erase detection
   - Toggle bit
   - Data polling
· Latched address and data
· TTL compatible I/O
· JEDEC standard byte-wide pinouts
· Available packages: 32-pin DIP and 32-pin TSOP and 32-pin-PLCC