datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  Exar Corporation  >>> XRT83SL34 PDF

XRT83SL34 Hoja de datos - Exar Corporation

XRT83SL34 image

Número de pieza
XRT83SL34

Other PDF
  no available.

PDF
DOWNLOAD     

page
80 Pages

File Size
424.9 kB

Fabricante
Exar
Exar Corporation Exar

GENERAL DESCRIPTION
The XRT83SL34 is a fully integrated Quad (four channel) short-haul line interface unit for T1 (1.544Mbps) 100Ω, E1 (2.048Mbps) 75Ωor 120Ω, or J1 110Ω applications.


FEATURES
• Fully integrated eight channel short-haul transceivers for E1,T1 or J1 applications
• Programable Transmit Pulse Shaper for E1,T1 or J1 short-haul interfaces
• Five fixed transmit pulse settings for T1 short-haul applications plus a fully programmable waveform
generator for transmit output pulse shaping for both T1 and E1 modes.
• Selectable receiver sensitivity from 0 to 36dB cable loss
• Receive monitor mode handles 0 to 29dB resistive attenuation along with 0 to 6dB of cable attenuation
for E1 and 0 to 3dB of cable attenuation for T1 modes
• Supports 75Ω and 120Ω (E1), 100Ω(T1) and 110Ω (J1) applications
• Internal and/or external impedance matching for 75Ω, 100Ω, 110Ωand 120Ω
• Tri-State transmit output and receive input capability for redundancy applications
• Provides High Impedance for Tx and Rx during power off
• Transmit return loss meets or exceeds ETSI 300-166 standard
• On-chip digital clock recovery circuit for high input jitter tolerance
• Crystal-less digital jitter attenuator with 32-bit or 64-bit FIFO selectable either in transmit or receive path
• On-chip frequency multiplier generates T1 or E1 Master clocks from variety of external clock sources
• High receiver interference immunity
• On-chip transmit short-circuit protection and limiting, and driver fail monitor output (DMO)
• Receive loss of signal (RLOS) output
• On-chip HDB3/B8ZS/AMI encoder/decoder functions
• QRSS pattern generator and detection for testing and monitoring
• Error and Bipolar Violation Insertion and Detection
• Receiver Line Attenuation Indication Output in 1dB steps
• Network Loop-Code Detection for automatic Loop Back Activation/Deactivation
• Transmit All Ones (TAOS) and In-Band Network Loop Up and Down code generators
• Supports Local Analog, Remote, Digital and Dual Loop-Back Modes
• Meets or exceeds T1 and E1 short-haul network access specifications in ITU G.703, G.775, G.736


APPLICATIONS
• T1 Digital Cross-Connects (DSX-1)
• ISDN Primary Rate Interface
• CSU/DSU E1/T1/J1 Interface
• T1/E1/J1 LAN/WAN Routers
• Public switching Systems and PBX Interfaces
• T1/E1/J1 Multiplexer and Channel Banks

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Número de pieza
componentes Descripción
PDF
Fabricante
QUAD T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
Ver
Exar Corporation
QUAD T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR ( Rev : 2004 )
Ver
Exar Corporation
OCTAL T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
Ver
Exar Corporation
OCTAL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
Ver
Unspecified
OCTAL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
Ver
Exar Corporation
SINGLE-CHANNEL T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
Ver
Exar Corporation
OCTAL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR ( Rev : 2007 )
Ver
Exar Corporation
OCTAL T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ( Rev : 2007 )
Ver
Exar Corporation
SINGLE-CHANNEL T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR ( Rev : 2003 )
Ver
Exar Corporation
OCTAL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
Ver
Exar Corporation

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Russianрусский

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]