RBiciLite™ Low-Cost Sensor Signal Conditioner with I2C and SPI Output

The RBiciLiteTM SSC Evaluation Kit contains the software and hardware needed for communication and calibration of an RBiciLiteTM sensor signal conditioning IC. A PC can communicate with an RBiciLiteTM socketed on the SSC Evaluation Board via an SSC Communication Board through a USB connection. The software should function on any Windows® 98/ME/XP/NT system after installation of a USB driver. Both the SSC Evaluation Board and the Sensor Replacement Board (SRB) can provide a replacement for a sensor. Only one of these can be used at a time for calibration as determined by the settings of jumpers K6 and K7 (see Figure 3.1). On the SRB, the sensor replacement is controlled by a potentiometer (see Figure 1.1). The SRB can be disconnected if the SSC Evaluation Board’s sensor replacement (artificial bridge stimulus) will be used.