UPD4564323 Ver la hoja de datos (PDF) - NEC => Renesas Technology
Número de pieza
componentes Descripción
Lista de partido
UPD4564323 Datasheet PDF : 84 Pages
| |||
µPD4564323 for Rev. E
10. Auto Precharge
During a read or write command cycle, A10 controls whether auto precharge is selected. A10 high in the Read or
Write command (Read with Auto precharge command or Write with Auto precharge command), auto precharge is
selected and begins automatically.
The tRAS must be satisfied with a read with auto precharge or a write with auto precharge operation. In addition, the
next activate command to the bank being precharged cannot be executed until the precharge cycle ends.
In read cycle, once auto precharge has started, an activate command to the bank can be issued after tRP has been
satisfied.
In write cycle, the tDAL must be satisfied to issue the next activate command to the bank being precharged.
The timing that begins the auto precharge cycle depends on both the /CAS latency programmed into the mode
register and whether read or write cycle.
10.1 Read with Auto Precharge
During a read cycle, the auto precharge begins one clock earlier (/CAS latency of 2) or two clocks earlier (/CAS
latency of 3) the last data word output.
Burst length = 4
T0
T1
T2
T3
T4
T5
T6
T7
T8
T9
CLK
/CAS latency = 2
Command
READA B
Auto precharge starts
Hi-Z
DQ
QB1
QB2
QB3
QB4
/CAS latency = 3
Command
DQ
READA B
Auto precharge starts
Hi-Z
QB1
QB2
QB3
QB4
Remark READA means Read with Auto precharge
(tRAS must be satisfied)
24
Data Sheet M14376EJ2V0DS00
Share Link: 