DM9013
3-port switch with Processor Interface
3. Features
Ethernet Switch with two 10/100Mb PHY, one MII/RMII, and general processor bus
interface
Support Reverse-MII
Processor bus slave architecture
EEPROM interface for power up configurations
Support TCP/UDP/IPv4 checksum offload
Support HP Auto-MDIX
Support IEEE 802.3x Flow Control in Full-duplex mode
Support Back Pressure Flow Control in Half-duplex mode
Per port support 4 priority queues by Port-based, 802.1P VLAN, and IP TOS priority
Support 802.1Q VLAN up-to 16 VLAN group
Support VLAN ID tag/untag options
Per port support bandwidth, ingress and egress rate control
Support Broadcast Storming filter function
Support Store and Forward switching approach
Support up-to 1K Uni-cast MAC addresses
Automatic aging scheme
Support MIB counters for diagnostic
uP data bus driving capability adjustable
Port 2 TXD/TXE driving capability adjustable
Auto. control to prevent memory read count error
128-pin LQFP 1.8V internal core, 3.3V I/O with 5V tolerant
Preliminary datasheet
11
DM9013-15-DS-P03
April 9, 2009