MB86613S Ver la hoja de datos (PDF) - Fujitsu

Número de pieza

componentes Descripción

Lista de partido

MB86613S

IEEE1394 Open HCI Controller

Fujitsu 

Preliminary

3.1.2. Device ID

Bit

Field Name

rwcu

---- -------------- ----

31:16 Device ID

r

reset

description

-------- ------------------------------------------

2010h

Device ID = ”2010”h.

3.1.3. Command

This register controls the MB86613S functions when generating and responding to the PCI cycle. Writing

”0000”h at this register separate the device from PCI interface except for the configuration access.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

i/o_enable

memory_enable

master_enable

Invalidate_enable

parity_err_enable

stepping_enable

SERR_enable

Bit

----

8

7

6

4

2

1

0

Field Name

rwcu

-------------- ----

SERR_enable

rw

stepping_enable r

parity_err_enable rw

Invalidate_enable rw

master_enable

rw

memory_enable rw

i/o_enable

rw

reset

--------

0b

description

------------------------------------------

0 : Does not output SERR#.

1 : Outputs SERR# if a parity error is detected.

0b

Since the device does not support the stepping function,

this bit always indicates ”0”.

0b

0 : Does not output PERR#.

1 : Outputs PERR# if a parity error is detected.

0b

0 : Uses memory write command.

1 : Uses memory write & invalidate command.

0b

0 : Prohibits the bus master operation.

1 : Allows the bus master operation.

0b

0 : 0 : Prohibits the memory access.

1 : Allows the memory access.

0b

0 : Prohibits the I/O access.

1 : Allows the I/O access.

15

Share Link: