N5162A Ver la hoja de datos (PDF) - HP => Agilent Technologies
Número de pieza
componentes Descripción
Lista de partido
N5162A Datasheet PDF : 32 Pages
| |||
Switching speed 1,2
Type
Digital modulation off
SCPI mode
List/Step sweep mode
Digital modulation on
SCPI mode
List/Step sweep mode
Standard
≤ 5 ms (typ)
≤ 5 ms (typ)
≤ 5 ms (typ)
≤ 5 ms (typ)
Option UNZ
≤ 750 µs
≤ 500 µs
≤ 1.15 ms
≤ 900 µs
Option UNZ
typical
≤ 650 µs
≤ 400 µs
≤ 950 µs
≤ 700 µs
Absolute level accuracy in CW mode 3 [ALC on]
Standard
+23 5 to –60 dBm < –60 to –110 dBm
100 kHz to 250 kHz 4 ±0.6 dB
±1.0 dB
> 250 kHz to 1 MHz ±0.6 dB
±0.7 dB
> 1 MHz to 1 GHz ±0.6 dB
±0.7 dB
> 1 to 3 GHz
±0.6 dB
±0.8 dB
> 3 to 4 GHz
±0.7 dB
±0.8 dB
> 4 to 6 GHz
±0.8 dB
±1.1 dB
Option 1EQ
< –110 to –127 dBm
—
±1.7 dB
±1.0 dB
±1.1 dB
±1.1 dB
±1.3 dB
1. Time from receipt of SCPI command or trigger signal to amplitude settled within 0.2 dB. For
units with serial numbers ending in 4742xxxx or less, switching speed is specified for power
levels < +5 dBm.
2. Switching speed specifications apply when status register updates are off.
3. Quoted specifications between 20 °C and 30 °C. For temperatures outside this range, absolute
level accuracy degrades by 0.005 dB/°C for frequencies ≤ 4.5 GHz and 0.01 dB/°C for
frequencies > 4.5 GHz. Output power may drift up to .003 dB per g/Kg change in specific
humidity (nom).
4. Specification applies to units with serial numbers ending with 4818xxxx or greater.
For units with lower serial numbers refer to the Archive Section at end of this document.
5. Or maximum specified output power, whichever is lower.
7
Share Link: 