datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

W89C982AF Ver la hoja de datos (PDF) - Winbond

Número de pieza
componentes Descripción
Lista de partido
W89C982AF Datasheet PDF : 28 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Preliminary W89C982AF
PIN DESCRIPTION
NAME
NO.
DO+
4
DO-
3
DI+
98, 97
DI-
CI+
100, 99
CI-
DT0+
to
DT7+
DT0-
to
DT7-
5, 11, 15,
20, 63, 68,
72, 78
6, 12, 16,
21, 62, 67,
71, 77
DD0+
to
DD7+
8, 13, 17,
23, 60, 66,
70, 75
DD0-
to
DD7-
9, 14, 18,
24, 59, 65,
69, 74
RD0+
to
RD7+
RD0-
to
RD7-
96, 93, 91,
89, 86, 84,
82, 80
95, 92, 90,
88, 85, 83,
81, 79
ICRS
46
NETWORK INTERFACE PINS
I/O
DESCRIPTION
O AUI Transmit Output:
Differential line driver that sends differential signal to Medium
Attached Unit (MAU). These pins require a 270 ohm pull-down
resistor to GND.
I AUI Receive Input:
Differential receiver that receives the AUI-compliant receive signal
from MAU.
I AUI Collision Input:
Differential receiver that receives the AUI-compliant collision
signal from MAU.
O Data Positive:
Transmit data driver positive that transmits data on the twisted pair
line. The driver will source or sink 32 mA. The driver is low during idle.
O Data Negative:
Transmit data driver negative that transmits inverted data on the
twisted pair line. The driver will source or sink 32 mA. Driver is low
during idle.
O Delayed Data Positive:
Transmit data driver positive that transmits delayed inverted data
on the twisted pair line. The driver will source or sink 32 mA.
Driver is low during idle.
O Delayed Data Negative:
Transmit data driver negative that transmits delayed data on the
twisted pair line. The driver will source or sink 32 mA. Low during
idle.
I Twisted Pair Line Receive Positive:
Positive data from the twisted pair line are received by the internal
receiver through this pin.
Twisted Pair Line Receive Negative:
I Negative data from the twisted pair line are received by the
internal receiver through this pin.
INTER-IMPR II INTERFACE PINS
O Inter-IMPR II Carrier Output:
The inter-IMPR II carrier (an active low on this pin) will be present
when the IMPR II is repeating packets. The IMPR IIs output this
signal to the interface of inter-IMPR II for retransmitting valid
packets or propogating network collision messages to other IMPR
IIs.
-4-

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]