General Description
DAVICOM’s DM9162 is a physical layer, low power, and single-chip 10BASE-T/100BASE-TX
transceiver specifically designed for consumer electronics, industrial, and enterprise applications. Through using a CMOS process, the DM9162 has the advantage of ensuring both high performance and savings in power consumption.
Through utilization of automatic media speed and protocol selection, the auto-negotiation
function is strongly supported in the DM9162. Then due to the built-in wave shaping filter, the
DM9162 has a significant convenience of not requiring an external filter to transport signals to
the media in 10BASE-T or 100BASE-TX during Ethernet operation. 

 Features
● Fully complies with IEEE 802.3 / IEEE 802.3u 10Base-T/ 100Base-TX, ANSI X3T12 TP-PMD 1995 standards
● Support HP MDI/MDI-X auto crossover function (HP Auto-MDIX)
●Support Auto-Negotiation function, compliant with IEEE 802.3u
● Fully integrated Physical layer transceiver On-chip filtering with direct interface to magnetic   transformer
● Selectable repeater or node mode 
● Selectable MII or RMII (Reduced MII) mode for 100Base-TX and 10Base-TX. Selectable MII or GPSI (7-Wired) mode for 10Base-T
● RMII with 50MHz clock output
● Selectable full-duplex or half-duplex operation
● MII management interface with mask-able interrupt output capability
● Provide Loopback mode for easy system diagnostics
● LED status outputs indicate Link/ Activity, Speed10/100 and Full-duplex/Collision.
Support Dual-LED optional control
● Single low power Supply of 3.3V with an advanced CMOS technology
●Lower Power consumption modes:
o Power Reduced mode (cable detection)
o Power Down mode
● Compatible with 3.3V and 5.0V tolerant I/Os
● Pin to pin Compatible with DM9161A/B/C
●DSP architecture PHY Transceiver.
●7x7mm 48-pin LQFP/5x5mm 32-pin QFN - 0.162um process