The HYS64(72)V4200 and HYB64(72)V8220 are an industry standard 168-pin 8-byte Dual in-line Memory Module (DIMM) which are organised as 4M x 64, 4M x 72 in an one bank and 8M x 64, 8M x72 in two banks high speed memory arrays designed with 64Mbit Synchronous DRAMs (SDRAMs Die Rev.B) for non-parity and ECC application. The DIMMs use -8 and -8B speed sort 4M x 16 SDRAM devices in TSOP54 packages to meet the PC100 requirements and -10 parts for 66 MHz bus speed applications. Decoupling capacitors are mounted on the PC board. The PC board design is according to INTEL’s module specification.

• 168 Pin unbuffered 8 Byte Dual-In-Line SDRAM Modules for PC main memory applications
• One bank 4M x 64, 4Mx72 and two bank 8M x 64, 8M x 72 organisation
• Optimized for byte-write non-parity and ECC applications
• JEDEC standard Synchronous DRAMs (SDRAM)
• Fully PC board layout compatible to INTEL’s Rev. 1.0 module specification
• SDRAM Performance:
• Programmed Latencies :
• Single +3.3V(± 0.3V ) power supply
• Programmable CAS Latency, Burst Length and Wrap Sequence (Sequential & Interleave)
• Auto Refresh (CBR) and Self Refresh
• Decoupling capacitors mounted on substrate
• All inputs, outputs are LVTTL compatible
• Serial Presence Detect with E2PROM
• Utilizes 4M x16 SDRAMs in TSOPII-54 packages
• 4096 refresh cycles every 64 ms
• 133,35 mm x 29,31 mm x 4,00 mm card size with gold contact pads