SCA610-E28H1A SINGLE AXIS ACCELEROMETER WITH ANALOG INTERFACE

The SCA610 accelerometer consists of a silicon bulk micro machined sensing element chip and a signal conditioning ASIC. The chips are mounted on a pre-molded package and wire bonded to appropriate contacts. The sensing element and ASIC are protected with silicone gel and lid. The sensor has 8 SMD legs (Gull-wing type).

FEATUREs
• Single +5 V supply
• Current consumption 2.5 mA typical
• Ratiometric output in relation to supply voltage (Vdd = 4.75 V...5.25 V)
• Enhanced failure detection features
   o Digitally activated, true self-test by proof mass deflection using electrostatic force
   o Memory parity check during power up, and self-test cycle.
   o Built in connection failure detection
• Digitally activated, true self-test by proof mass deflection using electrostatic force
• Wide load drive capability (max. 20 nF)
• True DC response
• Qualified according to AEC-Q100 standard

APPLICATIONs
SCA610 product family is targeted to automotive applications with high stability and reliability requirements. Typical applications include:
   • Electronic Stability Control (ESC)
   • Engine Vibration Measurement
   • Roll Over
   • Suspension
   • Inclination