SC18IM700 Ver la hoja de datos (PDF) - NXP Semiconductors.

Número de pieza

componentes Descripción

Lista de partido

SC18IM700

Master I2C-bus controller with UART interface

NXP Semiconductors. 

NXP Semiconductors

SC18IM700

Master I2C-bus controller with UART interface

10. Limiting values

Table 11. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).[1][2]

Symbol Parameter

Conditions

Min

Tamb(bias)

Tstg

VI

IOH(I/O)

bias ambient temperature

storage temperature

input voltage

HIGH-level output current

per input/output pin

referenced to VSS

55

65

0.5

GPIO3 to GPIO7

-

all other pins

-

IOL(I/O)

LOW-level output current

-

per input/output pin

II/O(tot)(max) maximum total I/O current

-

Ptot/pack total power dissipation per package

[3] -

Max Unit

+125 C

+150 C

+5.5 V

20 mA

8

mA

20 mA

120 mA

1.5 W

[1] This product includes circuitry specifically designed for the protection of its internal devices from the

damaging effects of excessive static charge. Nonetheless, it is suggested that conventional precautions be

taken to avoid applying greater than the rated maximum.

[2] Parameters are valid over operating temperature range unless otherwise specified. All voltages are with

respect to VSS unless otherwise noted.

[3] Based on package heat transfer, not device power consumption.

SC18IM700_3

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 3 — 12 October 2017

© NXP Semiconductors N.V. 2017. All rights reserved.

14 of 24

Share Link: