General Description
The LPC47M172 is a 3.3V (5V tolerant) PC99a/PC2001 compliant Advanced I/O controller for Desktop PCs. The device, which implements the Low Pin Count (LPC) interface, includes I/O functionality as well as Motherboard GLUE logic into a 128-pin package. This is space saving solution on the motherboard resulting in lower cost. The LPC47M172 also provides 13 general purpose pins, which offer flexibility to the system designer, and two Fan Tachometer Inputs. The LPC47M172’s LPC interface supports LPC I/O and DMA cycles.

Product Features
• 3.3V Operation (5V tolerant)
• LPC Interface
   − Multiplexed Command, Address and Data Bus
   − Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems
• ACPI 1.0b/2.0 Compliant
• Programmable Wake-up Event Interface
• PC99a/PC2001 Compliant
• General Purpose Input/Output Pins (13)
• Fan Tachometer Inputs (2)
• Green and Yellow Power LEDs
• ISA Plug-and-Play Compatible Register Set
• Motherboard GLUE Logic
   − 5V Reference Generation
   − 5V Standby Reference Generation
   − IDE Reset/Buffered PCI Reset Outputs
   − Power OK Signal Generation
   − Power Sequencing
   − Power Supply Turn On Circuitry
   − Resume Reset Signal Generation
   − Hard Drive Front Panel LED
   − Voltage Translation for DDC to VGA Monitor
   − SMBus Isolation Circuitry
   − CNR Dynamic Down Control
• 2.88MB Super I/O Floppy Disk Controller
   − Licensed CMOS 765B Floppy Disk Controller
   − Software and Register Compatible with SMSC's Proprietary 82077AA Compatible Core
   − Supports One Floppy Drive
   − Configurable Open Drain/Push-Pull Output Drivers
   − Supports Vertical Recording Format
• 16-Byte Data FIFO
   − 100% IBM Compatibility
   − Detects All Overrun and Underrun Conditions
• Sophisticated Power Control Circuitry (PCC) Including Multiple Powerdown Modes for Reduced Power Consumption
   − DMA Enable Logic
   − Data Rate and Drive Control Registers
• 480 Address, Up to Eight IRQ and Three DMA Options
• Enhanced Digital Data Separator
   − 2 Mbps, 1 Mbps, 500 Kbps, 300 Kbps, 250 KbpsData Rates
   − Programmable Precompensation Modes
• Keyboard Controller
   − 8042 Software Compatible
   − 8 Bit Microcomputer
   − 2k Bytes of Program ROM
   − 256 Bytes of Data RAM
   − Four Open Drain Outputs Dedicated for Keyboard/Mouse Interface
   − Asynchronous Access to Two Data Registers and One Status Register
   − Supports Interrupt and Polling Access
   − 8 Bit Counter Timer
   − Port 92 Support
   − Fast Gate A20 and KRESET Outputs
• Serial Ports
   − Two Full Function Serial Ports
   − High Speed 16C550A Compatible UART with Send/Receive 16-Byte FIFOs
   − Supports 230k and 460k Baud
   − Programmable Baud Rate Generator
   − Modem Control Circuitry
   − 480 Address and 15 IRQ Options
• Infrared Port
   − Multiprotocol Infrared Interface
   − 32-Byte Data FIFO
   − IrDA 1.0 Compliant
   − SHARP ASK IR
   − HP-SIR
   − 480 Address, Up to 15 IRQ and Three DMA Options
• Multi-Mode Parallel Port with ChiProtect
   − Standard Mode IBM PC/XT, PC/AT, and PS/2 Compatible Bi-directional Parallel Port
   − Enhanced Parallel Port (EPP) Compatible - EPP 1.7 and EPP 1.9 (IEEE 1284 Compliant)
   − IEEE 1284 Compliant Enhanced Capabilities Port (ECP)
   − ChiProtect Circuitry for Protection
   − 960 Address, Up to 15 IRQ and Three DMA Options
• Interrupt Generating Registers
− Registers Generate IRQ1 – IRQ15 on Serial IRQ Interface.
• XOR-Chain Board Test
• 128 Pin MQFP Lead-free RoHS Compliant Package, 3.2 mm Footprint